Solution to Windows Update Error 0x80072EFD

Posted on by

 

Windows Update error 0x80072EFD means that there are Windows ‌registry values that are blocking the update from being downloaded and installed. This error usually occurs on Windows XP system and is most likely to be caused by incorrect host file.

 

To trouble shoot this issue:

 

Method1: Repair the host file

To remove Windows Update entries from the HOSTS file, follow these steps:

-Click Start, point to All Programs, point to Accessories, and then click Notepad
-On the File menu, click Open.
-In the Files of type box, click All Files.
-In the Look in box, locate the following folder:

C:\Winnt\system32\drivers\etc\

-Double-click to open the hosts file.
-Remove any lines that contain entries for Windows Update (http://v4.windowsupdate.microsoft.com).
-On the File menu, click Save.
-Close Notepad.

 

Method 2:  Rename the Windows Update Software distribution folder

 

1. Stop the Windows Update service (make sure you are logged on as an Administrator)

Start button || Control Panel ||System and Maintenance ||Administrative Tools
Double-click Services 
(Provide the Administrator password or confirmation if prompted to do so.)
Right-click the Windows Update service and click Stop.

2. Click Start, type %windir% in the Start Search box, and then press ENTER.

Locate and rename the SoftwareDistribution folder.  You can rename it to softwareDistribution.old.

 

Method 3: Download a registry cleaner to fix the registry problem.

 Windows update error 0x80072EFD is easy to solve if you have enough knowledge about registry and computer system. We will not suggest you do a manual fix if you are a computer beginner because editing registry and system can cause serious damage which you can never expect. In such case, a registry cleaner will be needed to solve error 0x80072EFD effectively and safely for you.

Fix TrayApp.Msi Error

Posted on by

When you attempt to open HP Photosmart Digital Imaging software, a Trayapp.msi error tends to occur. The error message will request that you specify a new file path to locate the file. You could resolve the problem by reinstalling the HP Photosmart Digital Imaging software.

You can reinstall the program from the original installation disk, or it can be downloaded from the HP website. But if you feel the process is complicated, you could use an auto fix tool—registry cleaner.

Registry cleaner is good at fixing computer errors when people don’t know how to resolve their computer problems or they don’t want to spend too much time on it. So many people come to registry cleaner to fix the complicated computer problems. Now let’s see how to fix your trayapp.msi error by registry cleaner.

  • Download and install registry cleaner . 
  • Run the registry cleaner  on your system.
  • It can also discover and delete any remaining files that have been left behind in the system’s registry by the antivirus software.

 

If you are a computer technician or you know much about computer, you could come to this method to fix  trayapp.msi error  manually by yourself:

NOTE: Do not try to replace only the MSI file. Instead, reinstall the entire software package that is associated with the MSI file. If the error is associated with printer or camera software, reinstall the printer or camera software to re-associate all of the links to the files.

Just experience the process of fixing your problem so easily. Registry Cleaner is recommended by many people. I think you couldn’t miss the amazing effect. www.smartpcfixer.com/

How to Get Rid Of Shell32.dll Error

Posted on by

 

Shell32 dll error is an annoyed computer error that is closely related with shell32.dll file. It is most likely resulted by malware attacks, incorrect version of shell.dll file, invalid Windows Registry and low disk space.

 

Why do you need to fix this error?

Shell32.dll is a vital file for windows system to run properly. Without this file, computer desktop cannot show correctly; many programmes and software will not be able to run if this file is corrupted.

 

If your computer is poping up shell32 dll error, it is highly suggested that you NEVER fix it manually even if you have enough computer experience. Because of the complicated structure of Windows operating system, any attempt to fix this error by yourself may result in more serious damage to the PC. If you want to fix shell32 dll error safely and quickly, I will recommend you get the help of a reliable and professional shell32.dll error fixer.

 

More recommendation: Before you use a dll error fixer to scan and fix the error, you may scan your computer with a reliable anti-virus software first. Otherwise, the virus may block the dll fixer from installing and fixing the problem.

 

For more information on how to fix Shell32.dll error, visit this page.

Encounter Bad Image Error?

Posted on by

 

Bad image problem is a very common computer error related to virus or malware on your computer. Every computer has ever been attacked by virus. So many people think that virus is very difficult to get rid of. It is really not difficult if you come across this Registry Cleaner tool, which will help you fix the problem automatically. So please follow below instructions to fix bad image problem.

 

Registry cleaner is the kind of software good at keeping your computer free of junk files and registry errors. Using registry cleaner is easy and safe. You could fix your bad image problem in just a few steps.

 

  • Download and install registry cleaner . 
  • Run the registry cleaner  on your system.
  • It can discover and delete any remaining files that have been left behind in the system’s registry by the antivirus software.

Interested in this excellent tool? Please get it here: www.smartpcfixer.com/ I’m sure that your virus problem will disappear.

 

If you want to fix the problem manually, you could follow below detailed instructions by yourself. But it is a little complicated.

 

Please run sfc to see whether the system files are corrupted, and it will fix bad image problem automatically:

How to run sfc by administrator on windows 7 /vista:

  • Go to Start / All Programs / Accessories.
  • Right click the Command Prompt item and select the ‘Run As Administrator’ option.
  • Click Continue on the UAC prompt.
  • In the command prompt window, type the following command: SFC /SCANNOW
  • Press ENTER.

(Make sure the command is entered exactly as shown, including the space)

Note: This will take a few minutes to run. Try not to use the computer while it is running. After this is finished, exit any running programs and reboot your computer.

 

How to run sfc by administrator on windows xp:

  • Press Win+R button on your keyboard
  • Type cmd press enter
  • Type SFC /SCANNOW
  • Press ENTER.

(Make sure the command is entered exactly as shown, including the space)

Note: This will take a few minutes to run; try not to use the computer while it is running. After this is finished, exit any running programs and reboot the computer.

Get Rid of Win32 Error

Posted on by

 

Come Across Win32 Error? To fix a computer problem, you need to understand what program has caused the error and why this error occurs. Now let’s see what is a Win32 error?

 

A Win32 error is also called  generic host process error. The error message for a Win32 error states that “Win32 Services has encountered a problem and needs to close.” It is a standard computer error that occurs mainly on computers using Windows versions 95, 98 and 2000 and often during Internet usage. When your computer gets a Win32 error, the application that the error occurred in ceases to work and you are unable to use the function on your computer.

 

This error can be caused by a variety of reasons including:

 

  • Improperly installed service packs,
  • Viruses or spyware. 
  • Certain system files called DLLs become corrupted.

 

Note: Regarding the above reasons causing the error, resolving it may involve using updating websites, anti-virus software or a software fix.

 

Instructions to solve the Win32 Error:

 

One: Use registry cleaner software– the most efficient way to solve the Win32 Error. Registry cleaner is the kind of software good at keeping your computer free of junk files and registry errors. Using registry cleaner is easy and safe. You could fix your problem in just a few steps.

 

  • Download and install registry cleaner . 
  • Run the registry cleaner  on your system. Like virus scan software, registry cleaner  are generally started by clicking one button on the interface. 
  • It can discover and delete any remaining files that have been left behind in the system’s registry by the antivirus software.

 

 Two: Install Updates

 

  • Install any updates that may be available for your Windows system. To find and install available updates, open the “Start” menu, click “All Programs” and select “Windows Update” from the menu. Click “Yes” to confirm the action if prompted.
  • Select the “Check for updates” option in the left pane of the “Windows Update” window. Click “View available updates” and “Driver updates” for all of the devices that are installed on your computer. Updates will appear in list form.
  • Click each driver update that you want to install on your Windows system and press the “Install” button. If prompted to confirm the action or enter the administrator password, do so and click “OK.” The updates to your device drivers are now installed on your system.

 

Three:   Eliminate Viruses

 

Run your antivirus software’s virus scan on your system. This is generally accomplished by opening the program and clicking a “Scan Now” or “Start Scan” button on the main screen. The virus scan finds and eliminates files that are affiliated with viruses that are on your system. If you do not have an antivirus software installed on your system, this is probably part of the issue and you should install one for continuous antivirus protection.

 

 

 

Solution to Windows 7 Clean Installation Error 0×80300001

Posted on by

 

When computer users try to install Windows 7 on a formatted computer, they may receive this error message after attempting to install one of the drivers during the setup process:

 

“Windows is unable to install to the selected location. Error: 0×80300001″

Error 0×80300001 usually occurs when users are trying to do a clean installation of Windows 7 but the installation process cannot find the media drive. This error typically appears when the installation requires users to exchange disks in order to install required drivers on the system and the operating system disks are not placed back in the drive before proceeding with the install.

 

To stop this error, users have to put the operating system disk back in the drive, and go on with the installation. If you have finished installing the driver CD or DVD, you may have to put the Windows 7 install media DVD into the CDrom to continue installing.

 

If you have put the Media DVD in the DVDrom and still get this error, it may be a registry error. Registry controls how the system works including the DVD writing and copying. Error 0×80300001 may be caused by corrupted registry which is related to DVD and CD reading. In such case you may learn how to fix 0×80300001 with a registry repairing tool.

 

Repair Error Code 0×80070424

Posted on by

 

Come across  error code 0×80070424? Eager to get an answer? Following articel is a great help for you.

Code 0×80070424 is a very common windows update error when you try to update windows. It is always displayed as “ERROR_SERVICE_DOES_NOT_EXIST”.  Windows Update depends on these two services: Windows Update
and Background Intelligent Transfer (BIT). Either of these two services is missing or disabled, you will encounter error code 0×80070424. So to get rid of error code 0×80070424, you must ensure that that two services are running properly. Since we know the reason of the problem, it is easier to resolve.

 

To repair error 0×80070424, please follow below easy instructions:

First, you could try this auto fix tool registry cleaner to fix 0×80070424 error. It is a registry cleaner software, which is good at fixing registry errors and get your computer free of junk files. It is easy to use and could fix your problem automatically. It is the most efficient software I have ever used. You could get it from here: www.smartpcfixer.com/

  • Download and install registry cleaner to your computer.
  • Start it , and on the interface click Scan button.
  • After scanning, click Repair All button.
  • Then your problem will disappear.

 

If the problem isn’t fixed by above tool, you could follow below steps. It is a little complicated.

  • 1. Ensure that the necessary services are available and running
  • 2. To ensure that the necessary services are available and running, follow these steps:
  • 3. Click Start, type services.msc in the Start Search text area, and then click services.msc in the programs list. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
  • 4. Double-click Background Intelligent Transfer Service.
  • 5. If the Startup status lists Stopped, click Start and then click OK.
  • 6. Double-click Windows Update.
  • 7. If the Startup status lists Stopped, click Start and then click OK.
  • 8. Double-click Workstation.
  • 9. If the Startup status lists Stopped, click Start and then click OK.
  • 10. Close the Services window and try to install updates again.

 

If your problem is still not fixed, try to register the BITS files, Qmgr.dll and qmgrprxy.dll. Download the dlls from this link: http://www.dll-files.com/search.php  and save to : c:\windows\system32.

 

 

Fix Task Manager Disabled Problem

Posted on by

 

Task Manager is a program used to provide information about the processes and programs running on a computer, as well as the general status of the computer. It can also be used to terminate processes and programs, as well as change the processes priority. In some environments, users can access a task manager by pressing the buttons Control-Alt-Delete.

How to fix Task Manager Disabled problem?

 

Solution 1:

Try this registry cleaner tool to fix Task Manager Disabled problem. It is easy to use and could fix your problem automatically. Some of my friends say that it is the most perfect program they have ever used. Curious about the effect? Get it from here: www.smartpcfixer.com/

  1. Download and install registry cleaner to your computer.
  2. Start it and on the interface, click Scan button.
  3. After scanning, click Repair All button.
  4. Then your problem will disappear.

 

Solution 2:

  • 1. Click Start, then click Run, type gpedit.msc in the search box and click OK.
  • 2. Navigate to this branch:
  • 3. User Configuration / Administrative Templates / System / Ctrl+Alt+Delete Options / Remove Task Manager
  • 4. Double-click the Remove Task Manager option.
  • 5. Set the policy to Not Configured.

 

Soluiton 3:

Press Ctrl + Alt + Del to bring up Task Manager.

  • 1. Click “New Task…” then click “Browse…”
  • 2. Click My Computer on the left panel. Click C:\ – WINDOWS.
  • 3. Navigate to explorer.exe, right click and copy explorer. Rename it to explorer1 (.exe)
  • 4. Hit Cancel to go back to Create New Task window. Type regedit.exe and click OK.
  • 5. In the registry editor, navigate to the following Key:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  • 6. With the Winlogon key selected, look in the right side window for the 
    ‘Shell” value.
  • 7. Double click Shell. In the Value Data box, you should see Explorer.exe. Change it to explorer1.exe and click OK.
  • 8. Exit the registry editor and reboot the computer. 

Hope your problem is resolved!

Solution to Windows Defender Error Code 0x800106ba

Posted on by

 

Windows Defender sometimes fails to work because below errors:

Error Code 0x800106ba Application failed to initialize
Error Code 0x800106ba The systems license has expired. Your logon request is denied.

The error 0x800106ba is caused by a failure in system to update Windows Defender. Result of the error is that Windows Defender fails to start and function.

 

To resolve the issue, you need to first uninstall and then reinstall Windows Defender on your system. The steps to do this are displayed below:

 

Step 1: uninstall and reinstall Windows defender.

You can either uninstall it from control panel or using windows cleanup utility to do this process.

If you decide to uninstall from control panel, follow below instructions to remove Windows Defender:

  • Open Start menu, select Run, type appwiz.cpl and then press Enter.
  • Next, from the Currently installed programs list, select Windows Defender.
  • Click Remove.
  • Follow the onscreen instructions to remove Windows Defender from your system.
  • Restart the PC.

After that, you will need to reinstall it back to system to protect your computer. To reinstall it, just search Windows Defender in the search engine and download it from Microsoft. Double click the setup file to finish the process.

 

Step 2: Re-register some relative dlls.

There are several important dlls in system32 folder that are related to Window Defender. These dlls controls how the defender works and how the system updates it. Sometimes, virus or malware may block or remove these dlls from system or registry, causing failure in starting th Windows Defender. These dlls are:

  • wuapi.dll
  • wuaueng.dll
  • wucltui.dll
  • wups.dll
  • wuweb.dll
  • atl.dll
  • softpub.dll
  • wintrust.dll
  • initpki.dll
  • mssip32.dll

To register these dlls, just open Start menu, select Run.Type the regsvr32 file_name command and then press OK.

 

Step 3: clear errors in system registry
Registry problems are one of the major sources for Windows Defender error 0x800106ba. This is why computer experts always recommended that users regularly scan and clean their registry with the help of a professional registry cleaner. It will fix error 0x800106ba at once.

Fix Windows Installer Couldn’t Be Accessed Problem

Posted on by

 

One of the most common problems with Windows installer is windows installer couldn’t be accessed. I think many friends have encountered this kind of problem. Windows installer is very important for windows users, so when there is a problem it must be removed as soon as possible to ensure windows installer work properly.

If you also have this problem, you will get answer here today. Please follow below isntructions to fix the problem:

 

Instruction one: Try this registry cleaner  tool to fix the problem. It can fix your windows installer problem automatically. It is really very easy to use:

 

    • 1. Download registry cleaner.
    • 2. After installation, start it.
    • 3. On the interface, click Quick Scan button.
    • 4. When scanning process is finished, click Repair All button

Interested about this? Download from here: http://www.smartpcfixer.com/

 

Instruction two: Start the Windows Installer service:

  • Click Start, type Services.msc and press {ENTER}
  • Double-click Windows Installer
  • Set the Startup type of Windows Installer to Manual
  • Click Start to start the service. Note down the error message if any.
  • Click OK.

 

Instruction three: Unregister and re-register the Windows Installer to do that follow the steps provided below.

  • Click Start, click Run, type MSIEXEC /UNREGISTER, and then click OK. Even if you do this correctly, it may look like nothing occurs.
  • Click Start, click Run, type MSIEXEC /REGSERVER, and then click OK. Even if you do this correctly, it may look like nothing occurs, or you may briefly see an hourglass.
  • After you run this command, the operation is complete.
  • Try your Windows Installer-based application again.

 

Instruction four:

  • Click Start, click All Programs, click Accessories, right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow.
  • Type the following command, and then press ENTER: sfc /scannow
    [The sfc /scannow command scans all protected system files and replaces incorrect versions with correct Microsoft versions.]
  • A message will appear stating that ‘The system scan will begin’. Be patient because the scan may take some time.
  • If any files require a replace SFC will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  • If everything is okay you should, after the scan, see the following message “Windows resource protection did not find any integrity violations”.
  • After the scan has completed, close the command prompt window, restart the computer and check.

© Copyright 2010-2015 SmartPCFixer.com
EULA | Terms of Use  |  Privacy Policy | About Us |  Sitemap