How to Solve Microsoft visual library C++ runtime error

 

 

 Microsoft visual library C++ runtime error occurs usually after you have installed the office programme. The error is mainly caused by the conflict with two files in ”Support for fast searching” feature in Office XP: Mosdmn.exe and Mosearch.exe. If these two files are corrupted or become unreadable, you will get C++ runtime error.

 

To solve this error, there are four ways:

 

First, reinstall the Microsoft visual C++ package.

Microsoft Visual C++ 2010 Redistributable Package (x86) 32bit

http://www.microsoft.com/download/en/details.aspx?id=5555

Microsoft Visual C++ 2010 Redistributable Package (x64) 64bit

http://www.microsoft.com/download/en/details.aspx?id=14632

Updating or reinstalling the Visual C++ redistributable package will always work to resolve this error. Not only will it refresh all the visual C++ components on your PC, but it will also allow the various Office programs on your system to read the functions & files it requires to run.

 

Second, reinstall the programme that causes error.

The programs can either become corrupted or damaged, leading your system to save the Visual C++ components it requires incorrectly. In order to correct this problem, it’s recommended that you reinstall any application causing the VC++ errors, which can be done by following the steps below:

  1. Click Start > Control Panel
  2. Click “Add / Remove Programs”
  3. Find the program you need to reinstall
  4. Click the “Remove” icon next to the program to uninstall it
  5. Restart your PC & reinstall your program

 

Third, do a clean boot to troubleshoot the problem:

If the issue still persists after installing above package, the issue should be a software problem. I suggest you take a clean boot check whether it is a software conflict issue. If not, it is still recommended to address the problem with manufacturer support. Thank you for your understanding.

 

Clean Boot

=============================

1. Click Start, type “MSCONFIG” (without the quotations) in the Search Bar and Press “Enter” to start the System Configuration Utility.

2. Click the “Services” tab, check the “Hide All Microsoft Services” box and click “Disable All” (if it is not gray).

3. Click the “Startup” tab, click “Disable All” and click “OK”.

4. Restart the computer and test the issue.

Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of “Don’t show this message” and then click “OK”.

Forth, Clean your registry with a registry cleaner.

If you have tried all above solutions but without success, download a registry cleaner will always work to correct such problem. Its scan technique will detect and fix your errors within several minutes. After the registry is fixed, you shall be able to use your programmes.

How to Fix Applesyncnotifier & ItunesHelper Error

When you try to open itunes or update it, or sync the phone with itunes, you may get below error:

 

AppleSyncNotifier: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

iTunesHelper.exe  Entry Point Not Found

The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

 

Once you get this such error, you may not be able to open itunes or use your apple softwares. And the most desperate thing is, even if you reinstall itunes, the error still comes up. It seems that the only thing we can do is to reinstall windows. Actually, the fix for this problem is simple and easy.

 

Solution 1st:

  1. Temporarily shut down anti-virus and firewall software
  2. Open Control Panel, Programs and Features (or Add and Remove Programs), and go to the uninstall section
  3. Remove all Apple products in this order – iTunes, Quicktime, Apple Software Update, Apple Mobile Device Support, Bonjour, Apple Application Support.  You do not need to remove Safari
  4. Restart computer
  5. Go to Apple.com and download newest version of iTunes
  6. Re-install

 

Solution 2nd:

Pls download the dll from below:

http://www.dll-files.com/pop.php?dll=sqlite3

Click Download sqlite3.dll and start to download.

decompress the file and save to :

c:\windows\system32 directory

 

Solution 3rd:

Get a dll fixer to restore the corrupted sqlite3.dll for you. It will scan your computer and find the corrupted dll and restore it. It will also adjust incorrect setting that blocks a programme from running properly. Install this dll fixer will help you to get your itunes work again.

 

How to Protect Your Privacy on Computer?

Thought your computer is safe with latest antivirus and anti-malware sogtware? This is totally wrong. Antivirus and Anti-Malware software can only protect your computer system from being damaged, and block some attacks from hijackers. But how about security of your privacy? Browsers and websites will always remember and collect your browse history to analyse, so to promote specific advertisement in your browse page. And how do you keep your online search history from being found by people who use your computer? You have to learn how to protect your privacy on computer.

 

First, clean your browsing history, caches, passwords and cookies , etc. after you exist your browser.

Browsers always offer such options for users to choose. But not many people notice it. Some people will think that it does not matter leaving such files in computer because they think privacy is something more serious, and if they don’t browse any illegal websites, they don’t have to do the cleaning. Later they will find that the advertisements and spam mails come in pile. Trust me, internet is much more complicated than you thought it was.

 

To clean browser, you will have to do the following setting:

 

For IE, go to upper menu bar, click tools, internet option, you will open the internet option setting page. Check the box to clean your browsing history when exiting IE.

For other browser, go to upper menu bar, click tools, choose browser setting/option, then find privacy option, you can set the setting for remembering history or not.

 

Second, use different passwords for different accounts.

It is never wise to use same passwords for all accounts. Internet is never safe enough for one to do that. If you can risk the chance to lose all accounts with one account being stolen, please ignore this paragraph. If you want to keep your accounts safe, remember to set different passwords for each account. You can use a paper to write down your passwords and save it in a safe place in your house. Your house is much more safer than internet.

 

Third, use a system protector to keep your privacy safe and clean the unsafe files from your computer.

It will detect and clean the unsafe files for you, and protect any malware or virus to steal your information.

 

 

 

 

 

 

 

Cannot Start Microsoft Office Outlook. Cannot Open the Outlook window

While using microsoft office outlook, the above error will frequently occur. You can run Outlook with the /resetnavpane argument. Please follow the below steps to fix this error. It’s very simple.

1. Press Windows key and R together to open the Run dialog.

2. In the Open field, type:

outlook.exe /resetnavpane

Note: there is a space between outlook.exe and /resetnavpane. There are no other spaces in what you have to type. You’d better copy it to the blank in case of any fault.

3. Click OK. Outlook should open.

After this, your outlook can work properly.

Why can’t open PDF files?

Many factors can prevent a PDF from opening in Adobe Reader or Acrobat. Some factors include damage to the PDF, damage to the Reader or Acrobat installation or update, or an out-dated version of Reader or Acrobat. Other factors include unrecognizable file types or PDFs created with non-Adobe programs. Try the suggestions below as your first troubleshooting steps.

Password-protected PDFs

The creator of a PDF can add password security to a document to prevent unauthorized users from viewing the PDF. To open this type of document, enter the password when prompted. Unless the PDF creator has shared the password with you, you cannot open the PDF.

Non-compliant PDFs

Reader and Acrobat block PDFs that do not conform to certain industry-specific PDF standards. For example, Reader and Acrobat block PDFs that may allow potentially harmful content to load, or PDFs created with bad syntax. These PDFs can pose a security risk to your system.
PDFs created from non-Adobe products may not comply with the complete PDF specification, and therefore do not open in Reader or Acrobat. In addition, earlier versions of Reader or Acrobat are not as strict in their conformance to PDF standards as are newer versions. Each new version of Reader or Acrobat forces PDFs to be more compliant to the PDF specification. This can explain why you were able to open a particular PDF in an older version of the product, but not in the latest version. If you know and trust the creator of the PDF or where it came from, decide if you want to revert to an earlier version of Reader or Acrobat to open the PDF.

Update Reader or Acrobat

Adobe releases regular security updates for Reader and Acrobat. It’s likely that the latest update patch can fix a conflict with your system.

  • Open Reader or Acrobat.
  • Choose Help > Check for Updates.

Install the latest version

Try uninstalling Adobe Reader, making sure that you remove all versions. (In Windows, use Add or Remove Programs.) Then install the latest version.

Repair Reader or Acrobat

Reader or Acrobat, or the resources they rely on, could be damaged. Repairing the installation is a quick troubleshooting safeguard.

Note: You cannot repair the PDF itself. However, if you have the source file, you can re-create the PDF using an Adobe product. Or, use the Adobe CreatePDF online service on Acrobat.com.

How to Fix Common Outlook Express Errors?

The following are some of the common error messages that you may encounter when you attempt to send and receive error messages using Outlook Express:

No connection could be made because the target machine actively refused it.

The server could not be found. (Account:account name, POPserver:'mail', Error Number: 0x800ccc0d)

Task 'server name - Sending and Receiving' reported error (0x800ccc0f): 'The connection to the server was interrupted. If this problem continues, contact the server administrator or Internet service provider (ISP). The server responded: ?

Your server has unexpectedly terminated the connection. Possible causes of this include server problems, network problems, or a long period of inactivity. Account. account name, Server: 'server name', Protocol: POP3, Server Response: '+OK', Port: 110, Secure(SSL): No, Error Number: 0x800ccc0f

Task 'SMTP server name - Sending and Receiving' reported error (0x80042109): 'Outlook is unable to connect to your outgoing (SMTP) e-mail server. If you continue to receive this message, contact the server administrator or Internet service provider (ISP).

The operation timed out waiting for a response from the receiving (POP) server 0x8004210a

A time-out occurred while communicating with the server 0x800ccc19

You may also receive error messages containing error codes: 0x800ccc15, 0x80042108, 0x800ccc0e, 0x8004210b, 0x800ccc0b, 0x800ccc79, 0x800ccc67, and 0x80040900.

Causes of the Error

Problems in Internet Connectivity and incorrect account settings are one of the most common reasons behind these Outlook Express errors.

Resolution Methods

Troubleshoot the Outlook Express error messages by performing the following steps:

Step 1: Ensure that your PC is connected to the Internet

The best way to do this is to open Internet Explorer and try to open a Website. If you are able to browse the Internet, you are connected, otherwise you are not.

If you are not able to browse the Internet, then you will first have to troubleshoot Internet connectivity problems and resolve them. Some of the steps that you can perform to resolve Internet Connectivity problems are:

  • The first and easiest way to troubleshoot network problems is to use the Network Diagnostics tool that is shipped both with Windows XP and Windows Vista computers. Using this tool you can scan your Windows computer to ensure that it has network connectivity and ensure that your network related programs are running fine. This tool basically helps you gather information that is required by you or a network professional to troubleshoot connectivity problems with your computer. After you diagnose the problem, resolve it to restore the connectivity. To run the Network Diagnostic tool, open Internet Explorer and then try to open a Web page. When an error message similar to “Internet Explorer cannot display the webpage” is displayed, click the Diagnose Connection Problems link. This will display the Network Diagnostics dialog box. Follow the instructions on this dialog box to diagnose connectivity problems with your system.
  • You can also use the Network Troubleshooter wizard to troubleshoot network connectivity problems. To launch this wizard, open the Start menu, select My Network Place, click View network connections in the left pane of My Network Places window, and then click Network Troubleshooter in the left pane of the Network Connections window. Follow the instructions in the wizard that opens to troubleshoot, diagnose, and resolve your network connectivity problems.
  • You can also manually troubleshoot the problem. Some of the tasks that you can perform are:
    • Ensure that your DSL, cable or dial-up modem is properly connected to the PC and is working fine.
    • Restart your modem or router.
    • Check the settings of the firewall or router to ensure the SMTP (25) and POP3 (110) are open.
    • Ensure that the connectivity device you are using is compatible with your system.

Step 2: Check e-mail account settings

To view your e-mail account settings in Outlook Express, on the Tools menu, select Accounts and then display the Mail tab. Next, double-click the e-mail account you are troubleshooting to open its properties dialog box. Some of the important information that you need to configure e-mail account are:

  • E-mail address (General tab)
  • SMTP and POP3 server Address (Server tab)
  • Login username and password (Server tab)
  • SMTP and POP3 port numbers (Advanced tab)

The settings of your e-mail account are based on the configuration information given by your e-mail service provider. Therefore, you must ensure that your e-mail account is setup exactly the way the e-mail service provider has specified.

 

 

 

404 Not Found Error

404 Not Found error messages are frequently customized by individual websites, so keep in mind that the 404 error may show up in just about any way imaginable depending on what website it’s shown from.

Here are some common ways in which you might see the HTTP 404 error displayed:

  • “404 Error”
  • “404 Not Found”
  • “Error 404″
  • “HTTP 404″
  • “Error 404 Not Found”
  • “404 File or Directory Not Found”
  • “HTTP 404 File Not Found”
  • “404 Page Not Found”

404 Not Found error messages can appear in any browser and in any operating system.

The 404 Not Found error displays inside the Internet browser window, similarly to webpages.

A 404 error is an HTTP status code that means that the page you were trying to reach on a website couldn’t be found on their server.

Technically, an Error 404 is a client-side error, implying that the error is your mistake, either because you typed the URL in wrong or the page has been moved or removed from the website and you should have known.

No matter the reason for the 404 error, there is plenty you can do to try to get to that page.

  1. Retry the web page by clicking the refresh/reload button or trying the URL from the address bar again. The 404 Not Found error has been known to appear on occasion even if there is no real issue so a simple refresh will often load the page you were looking for.
  2. Check for errors in the URL. Often times the 404 Not Found error appears because the URL was typed wrong or the link that was clicked on points to the wrong URL.
  3. Move up one directory level at a time in the URL until you find something. For example, if www.w.com/a/b/c.htm gave you the 404 Not Found error, move up to www.w.com/a/b/. If you get nothing here, move up to www.w.com/a/. This should lead you toward what you’re looking for or at least confirm that it’s no longer available.
  4. If you move all the way up to the website’s main page, try to run a search for the information you’re looking for. If a search function isn’t available, try finding your information by using links from this page to dig deeper into the site.
  5. It’s also possible that you simply have the wrong URL – entirely. You might be trying to access a webpage that exists as another name.

    When you’re this lost, the best course of action is to search for the page at a popular search engine, like Google. Chances are you’ll find the page you’re looking for.

  6. Finally, if all else fails, you may want to attempt to contact the webmaster for information on where you might locate the page you’re looking for. The webmaster of most Internet sites can be reached via email at webmaster@website.com, replacing website.com with the actual website name.

How to Fix High CPU Usage?

High CPU usage means that the programs installed on your computer are using full energy of the CPU, and your computer thus runs very slowly.

Open up task Manager by pressing Crtl-Alt-Delete at the same time, and then click Performance tab, your CPU usage history will be displayed.

There are many legitimate programs or illegitimate programs such as spyware and viruses on your computer that are the cause for high CPU usage.

If the CPU spikes happen rarely and can correct themselves quickly, don’t worry about it. But if they keep coming back or don’t go away, you have to fix it.

How to stop the cause for high CPU usage?

  • Scan for Spyware or Adware                                                                                    Since spyware or adware is often the cause for high CPU usage, you should first scan your PC for these nasties.
  • Disable the amount of services running in the background                                You can do this by altering your computer configuration. Here is how:
    1. Open your Start menu.
    2. Click Run
    3. In the command screen type “msconfig.exe”
    4. In the “system configuration utility”,click either “service” or “startup” tab
    5. Uncheck all programs that your are no longer using.
    6. Click “OK”
  • Cleaning your Registry                                                                                           You can free a lot of resources by cleaning your registry.  Use a cleaner to repair it. This is a must!
  • Stop Svchost.exe                                                                                                Svchost, which is short for “service host”, is a core part of the operating system that provides support to many of the required services that are Windows. You can see all the copies of svchost and what services they are running by typing “tasklist / svc” in a command window. It’s necessary for your computer to function properly. However, you can stop the amount processes that are loaded. This will limit the need to for svchost server for loading. Here is one way to stop the svchost from loading:
    In Windows XP1. Click Start | Run (type) “services.msc” (no quotes)
    2. Scroll down to “DNS Client”, Right-click and select: Properties
    3. Click the drop-down arrow for “Startup type”
    4. Select: Manual, click Apply/Ok and restart.
    (IF you are the only PC user, and not part of a domain.)

    This also eliminates one of SVCHOST process in Task Manager. Remember this is only one way to eliminate the processes in svchost. You need to disable a list of unnecessary programs to limit the need to use svchost server.

How to Uinstall and Reinstall A Programme

Sometimes, virus or malware can damage programmes and applications and cause the programmes to terminate or fail to open. In such case, the best way to solve the problem is uninstall and reinstall the applications. In this article, we will discuss how to uninstall and reinstall a programme through different ways.

 

HOW TO UNINSTALL AN APPLICATION:

 

Method 1: Uninstall through control panel.

This is the most popular way to uninstall a programme and is always useful. To remove a programme from control panel, you have to

1.click start button

2. click control panel

3. click add and remove programmes in control panel

4. find the programme you want to uninstall

5. click uninstall to delete the application from your system

 

Method 2: Uninstall from the programme’s install folder

Many programme will defaultly include an executable file for uninstallation in its folder. This file is made specifically for the application and will normally work. If you can’t uninstall a programme from Control Panel, you will find it useful to uninstall throught this small executable file from manufacturer. Don’t bother to find the install folder. Just click start button, all programmes, find the programme name, left click it and you will find uninstall option.

 

Method 3: Uninstall with the help of a registry cleaner

If you cannot uninstall the programme through control panel or the default uninstall file from the programme, it may possibly because the registry of the application is corrupted and the uninstall function could not be brought up. To solve this problem, you will have to fix the corrupted registry first. If you are not familiar enough with registry edit, it is highly recommended that you use a registry fixer to help you.  Such tool also has a strong removal function for some malware or programmes designed to be never removable.

 

HOW TO REINSTALL A PROGRAMME

To reinstall a programme, you have two ways: Use an install disc or download the setup file from the website. The disc contains the original setup file and it may be old and outdated. It is better to download latest file from the manufacturer’s website.

 

Fix Winword.exe error In a Minute

Winword.exe is the main file for Microsoft Word programmes. It is an important component of Microsoft office.  With this file, you can open MS word process and do word editing. But sometimes you may get this error:

 

WINWORD.exe has generated errors and will be closed by windows. You will need to restart the program. An error log is being created.

 

This error indicates that the programme is terminated by some conflicted files. You will have to clear these files to smooth the running. There is several possible solutions to fix Winword error, try one by one and they may fix the problem for you.

 

 Method 1, delete all Normal.dot files from computer.

 Normal.dot files have been proved to cause problem of winword error. They are files that store the information of word templates. To delete the .dot files, just open your windows explorer(double click my computer icon on desktop), and in search box type *.dot, and press enter. After the search finishes, delete all normal.dot files. NOTE: delete all these files will result in loss of the existed word settings.

 

Method 2, delete winfax template files.

If you have installed winfax in your computer and you are now facing the winword error, it is possible that winfax template is the cause. To delete the winfax template, you have to open your windows explorer(double click my computer icon on desktop), and in search box type Wfword2k.dot, and press enter. After the search finishes, delete the exact file.

 

Method 3, Uninstall and reinstall Microsoft Word.

Although this method looks troublesome and the last thing one will choose, but it is always a good way to solve any error. By uninstallation and reinstallation, you can wipe out the corrupted files that causes the error, and replace them with correct ones. Hense, problem is solved. To uninstall MS word, just go to control panel, add and remove programmes, find Microsoft Word and click uninstall button. After that, use the office CD to reinstall it.

 

Method 4, use a winword fixing tool to fix the problem.

This is the easiest and quickest way to fix the winword error. Using this fixing tool will help you delete and replace the corrupted and harmful files in the system. You will find Word programme function well in a minute.