An invalid Win32 application error is a very common computer problem encountered by so many computer users. Some people always think that the problem is caused by the operating system itselft.  Actually, the problem can be caused by many reasons. If you find the right reason, the problem is very easy to fix.

The reasons that can cause Win32 application error:

• 1. Corrupt, bad or missing file within the application,
• 2. The program is installed on an operating system it is not compatible with,
• 3. It is infected by a malicious parasite such as a Virus, Trojan, worm or malware.

These errors cause programs or files not to launch properly. There are many simply ways to troubleshoot and solve invalid Win32 application errors. When you try to fix the invalid Win32 application error, following steps can be tried.

Step one: Fix the problem with a registry cleaner.

Most of the time, the problem can be caused by the registries on your PC. So the best way to fix the problem is to get a best registry cleaning software. SmartPCFixer is a good one which has helped so many users fix the win32 problems.

• 1. Download SmartPCfixer and install it to your computer.
• 2. Do a scanning process to discover the problems.
• 3. Click “Repair All” button to fix the problem automatically.

Step two: Fix the problem yourself.  But you need to know much about computer operation.

• 1. Launch your anti-virus program and perform a full-system scan to remove any malicious files that could be causing Win32 application errors.
• 2. Launch your program after it has installed, then click the “Update” button to install the latest virus and spyware definitions. Perform a full-system scan and delete all detected malicious files.
• 3. Run Disk Defragmentor to fix file errors. Many times, Win32 application errors can be caused when program files are scattered on your computer. When files are scattered, the programs that use them have slow launch speeds and occasionally freeze.
• 4. Click your hard drive under “Volume” to highlight it and choose “Defragment.” The process may take a couple of hours depending on your computer use.

TrayApp error message is an error connected with HP software. It asks you to specify a new file path to locate the software and will not locate the software for you. This happens for a number of reasons, such as file corruption or malware. In fact , it is not difficult to fix the problem by yourself.  There are two ways to fix the problem. One is reinstalling HP software. Second is cleaning your computer with a registry cleaner tool.

The first way to fix the trayapp error is to re-install the HP imaging software program. You will need the original installation disc. Once the application is re-installed, you will no longer see the Trayapp error.

• 1. Place the HP imaging software installation disc into your computer’s CD/DVD drive.
• 2. Click “Start,” then “Computer.” Double-click the CD drive icon to start the re-installation process.
• 3. Follow any onscreen instructions to complete the re-installation. Wait for the installation completion message and reboot your computer. The Trayapp error will be fixed once you have restarted your computer.

Second, scan your computer with Registry cleaner-SmartPCFixer. SmartPCFixer is good at cleaning computer junk files and registries which have caused trouble for your computer.  But with Smartpcfixer,the Trayapp problem will be eliminated very quickly. Please follow below steps:

• 1. Download SmartPCFixer and install it to your computer.
• 2. Do a scanning with SmartPCfixer and check for the problems.
• 3. After scanning, fix the found problems with one click.

It is so easy to fix, right?  Smartpcfixer has helped so many people to fix trayapp problems. You don’t need to know much about computer. Every step is easy to operate.

Bad Image error is usually encountered by computer users. A bad image error is usually a good sign that you have some sort of virus or malware on your computer. It can be difficult to remove some viruses and malware, and in some cases you may need to back up your computer and reinstall the operating system. There are a few preliminary steps you can take to remove the virus.  To fix the bad image error, you only need to take a few easy steps to fix the problem.

First, please conduct a clean boot to fix the problem:

• 1. Click Start, type “MSCONFIG” (without the quotations) in the Search Bar and Press “Enter” to start the System Configuration Utility.
• 2. Click the “Services” tab, check the “Hide All Microsoft Services” box and click “Disable All” (if it is not gray).
• 3. Click the “Startup” tab, click “Disable All” and click “OK“.
• 4. Restart the computer and test the issue.

Note: Clean Boot is a troubleshooting step. If some programs have been disabled, we can re-enable them later. If you see the System Configuration Utility, check the box of “Don’t show this message” and then click “OK“.

Second, run the windows updates of your operating system.

• Download the latest updates for your operating system from Microsoft. Open Windows Update from the Start menu and download and install all of the latest updates.
• Restart your computer and see if the bad image error still occurs. If the error message is still there, you will need to back up your files to an external hard drive and reinstall your operating system with the restore disc that came with your computer.

Third, do a registry cleaning of your computer.

Smartpcfixer is a good registry cleaning software which dedicates to fix your computer registry problems, and will clean the operating system completely to make your computer run very fast. Please follow below steps to fix Bad Image error:

• 1. Download Smartpcfixer to your computer.
• 2. Do a scanning of your computer.
• 3. Fix the discovered problems with one click.

So many people use Outlook in their daily life. But sometimes they always encounter a problem with Outlook. Microsoft Exchange Server administrators may need to change the server settings if users connect to the server with Outlook Express using a POP3 connection. The users will receive an error message when they try to send email to an email account on the server. The message may vary but will typically begin with “An unknown error has occurred” and specify “Server Error: 421.” The error occurs when the number that has been set for maximum inbound connections on the server is met. To resolve the problem you must increase the number of connections allowed.

To fix Outlook problem is not difficult no matter you know much about computer or not. Follow methods will tell you how to fix Outlook problems in easy ways:

Method one: Use a registry cleaner tool to fix the error code 421.

Smartpcfixer is pooular registry cleaner software which can fix all kinds of computer problem, such as windows errors, Outlook problems, Printer errors, registry problems, etc. With Smartpcfixer, you don’t need to worry about your PC any more. Please follow below simple steps to fix your Outlook problem:

• 1. Download SmartPCFixer to your computer and install it.
• 2. Conduct a scanning process.
• 3. After scanning, click “Repair All” button to fix all the problems found.

Method Two: Fix the problem manually by yourself.

• 1. Open the Microsoft Exchange Server Administrator utility. The access path to the utility will vary depending on the installation procedure used to set up your Exchange Server.
• 2. Click the “Connections” icon in the left-side navigation pane of the Microsoft Exchange Server Administrator window for the server you want to administer. Double-click the Internet Mail Service icon in the right-side pane. This opens the Properties window.
• 3. Click the “Connections” tab in the Properties window, then click the “Advanced” button. This opens a configuration window.
• 4. Set the number for “Max No. of Inbound Connections” to a high number such as 100. You may need to reset it to higher values until the problem is resolved.
• 5. Close all open Exchange Server Administrator program windows to complete the process.

PC is running slowly? Take a long time to reboot? Most of the time, a slow PC is caused by software on your computer.  It can be frustrating to have a computer that takes a long time to complete even the simplest of tasks, especially if it had previously been a lot faster. As software is loaded on a PC, all manner of issues can crop up that cause problems with stability as well as making for a sluggish user experience.

There are some ways you can clear up those problems and get your computer running fast and stable once more.

One: Reduce the Startup programs on your computer.

Sometimes there are too many programs are set as startup programs. This will reduce the responding speed and startup speed of your computer. To fix the problem, you need to remove some startup programs.

• 1. Click on the “Start” button, then click on “Control Panel” and “Add/Remove Programs.”
• 2. Scroll through the list of programs that are installed on your PC and find the ones that you don’t use. Click the “Remove” button to uninstall that software until you have a list that only has the software you want on your PC.
• 3. Click on “Start,” then “Run.” Type in “msconfig” and click the “OK” button. Click the tab labelled as “Startup” and uncheck any programs that you don’t want automatically loading when your computer boots up.
• 4. Programs that are set to run automatically take up a lot of computer resources which can cause conflicts with other software and slow down your PC. Click the “OK” button when finished.

Have you ever got a print spooler error? When you send a print job to your desktop or network printer, that job actually goes into a print queue and prints from there. If the jobs you send to the printer fail to appear, the first thing you should check is the print spooler service. This arrangement allows more than one job to be sent at the same time, and each of those jobs is serviced as the printer becomes available.

• 1. Download and install Smartpcfixer to your computer.
• 2. Do a scanning with Smartpcfixer.
• 3. After the scanning is finished, repair the problem by clicking “Repair All” button.

Many errors can plague your Web-browsing experience, but one of the most common and variable is the 404 error page. A 404 error display tells you that the site you are trying to access is unavailable, and the cause could lie in one of several possibilities. 404 errors usually don’t appear because you lack a valid Internet connection, but signal a problem with the Web address. Some of these error pages may not be labeled with a “404,” but rather a more generalized “page not found” message.

To fix this error, following methods can be followed:

One: Check the URL spelling

If even one character is incorrect in a long string of letters and numbers, you’ll probably encounter a 404 error page. Take care to minimize errors when typing Web addresses manually.

• 1. Dowload and install SmartPCFixer to your computer.
• 2. Do a scanning in the IE module.
• 3. Then fix the discovered problem by clicking “Repair” button.

The registry in Microsoft Windows is essentially the nucleus of the operating system. It holds data on all programs installed on the computer, as well as settings for the software. The registry is the reason Windows doesn’t need MSDOS. Because of the importance of the registry, it is necessary to correct any errors that occur within the registry, including registry error 32. There is software, though, that can correct this error.

All settings are saved when the computer is shut off because of the data in the registry. Without the registry system, your computer will be useless. Sometimes when applications are installed and uninstalled, remnants of the application are left in the registry file system. When this debris accumulates, it clogs the file system, leading to conflicts between the files and thus creating errors. Free registry cleaner programs are available for download that deal with this problem. These programs can clean the registry system and remove the errors.

All computers will run very slowly after using for a long time without cleaning up the rubbish and junk files. Many people think that their computer running slowly because of their computer is too old. Actually, there are many reasons that can cause a slow computer.

The main reasons that cause your PC run slowly:

• 1. Hard drive errors.
• 2. High level of hard drive fragmentation.
• 3. Junk files accumulating on your PC.
• 4. Applications consuming computer resources.
• 5. Harmful applications (spyware and viruses).

Nowadays our PCs always get hard tasks to perform -new colorful games, heavy graphic interfaces, large photos and other files, HD movies. It all takes much of a PC’s hard drive and chipset resources. As a result a computer starts working slowly.

Answer One:

To optimize your PC, there are various Windows utilities you can use. But one of the easiest way to fix the problem – disk defragmentation.With defragmention, your PC organizes the placement of files and programs on your hard drive so that they occupy a single space. This speeds up reading and writing data on your hard drive.By following a few simple guidelines, you can maintain your computer, help increase your PC speed, and help keep it running smoothly.

Steps:

• 1. Click “Start” button, go to “Accessories”，and click the “System Tools”.
• 2. On the Tools window, click the “Defragment” button. You will now be prompted with another window that shows your hard drives.
• 3. Select the drive you want to defrag and then click Analyze to make sure that the drive you selected needs defragmentation.

Note:It is important to analyze the drive first in order to determine how much time it would take to defrag the computer.

Answer Two:
Many people also recommand and use the registry cleaner software to fix this problem. It can help you speed up your computer in the fastest and easiest way.
It may:

• a. Discover your junk files and remove them.
• b. Find and fix the hard drive errors.
• c. Detect viruses in your PC.

And the registry cleaner can do a very quick scanning to display a series of errors found. You just need to click the button to repair all these found problems. With the best Registry Cleaner software, I think your computer will run in the fastest speed.