Do you have a problem with Data Execution Prevention when you try to open a program without success? If you do, read following article. You will get an answer.

Data execution prevention (DEP) is a mechanism dedicated to preventing security attacks. Modern processors with the x86 and x86-64 architectures provide hardware support for DEP, but the operating system also needs to use this hardware feature for applications to be protected. You can disable the DEP feature on your computer at the operating system level. And you can also add an exclusion in the DEP list to the program needed to be started .

The problem is easy to resolve if you follow below instructions:

I don’t know if you have heard about registry cleaner tool or not. Many people have resolved  Data execution prevention problem with this fix tool. The largest advantage of this tool is easy to use and risk free. I strongly recommend you have a try.

• 1. Download registry cleaner by clicking it.
• 2. After installation, start it.
• 3. On the interface, click Quick Scan button.
• 4. When scanning process is finished, click Repair All button.

It is so easy, isn’t it?  Just have a try. It will give you amazing result.

If the problem is not resolved by above tool, please follow below steps:

• Log on windows as administrator to run your PC.
• Click on “Start,” “Control Panel,” “System and Maintenance” and then “System.”
• Click “Advanced System Settings” and then “Settings.”
• Click on the “Data Execution Prevention” tab, and then click on the check box next to “Turn on DEP for all programs and services except those I select” until there is no check mark.
• Click “OK.” At that point, DEP is turned off at the operating system level.

Glad for your patience of reading this article. I think your problem must have been resolved!
 

Sometimes when we start our computer or search the internet, there is always an error message occurs telling that there is not enough space with virtual memory. Many people may not understand what virtual memory is? Now let’s read the following articel together. You will find your answer quickly.

virtual memory is space on a hard drive specifically allocated for use as additional system memory. When the physical memory runs out, data is allowed to overflow into this space. Sometimes the operating system stores data in virtual memory if it hasn’t been accessed in awhile to free up available RAM. So you can change the parameters of virtual memory to resolve the problem.

Please follow below instructions:

Use a registry cleaner tool to fix the problem automatically. registry cleaner is an easy to use software dedicating to fix some registry problems for your computer. It is very popular, and many people have resolved computer problems with it. Just a few steps:

• 1. Download registry cleaner  to your computer.
• 2. Start it and on the interface click Quick Scan button.
• 3. After scanning is finished, choose Repair All option.

So easy! Right?

If the problem still exists or you are a computer professional person, you could try below steps:

• 1. Click on “Start,” then right-click on “My Computer.” On the menu that pops up, click “Properties.”
• 2. Select the “Advanced” tab and click the “Settings” button located under “Performance.”
• 3. Open the “Advanced” tab and click on “Change” at the bottom of the screen under “Virtual Memory.”
• 4. Select your hard drive from the list. Normally this is the C: drive. Click the button next to “Custom size,” and enter the initial size and maximum size for the paging file.
• 5. Setting both of them to the same value will provide the best performance. The current virtual memory amount is shown at the bottom of the screen, along with the recommended amount of memory.
• 6. Click the “Set” button when you’re done, and click “OK” on each open window to close them.
• 7. Restart your computer. When it finishes booting, the new virtual memory settings will be activated and the system can instantly take advantage of the additional space.

I’m sure your problem must have been resovled. I’m glad to help you!

Windows Vista is not very stable for updates. Some people who are using Vista may often encounter this windows update error 641. Well, this error is not diffult to get rid of especially after you read following instructions:

First: If you are not a computer professor or don’t know too much about computer, I recommend you try this registry cleaner tool to fix this error automatically. A lot of Vista users resolved the problem with this tool. See below steps:

• 1. Download registry cleaner by clicking it.
• 2. After installation, boot registry cleaner and on the interface choose Quick Scan button.
• 3. After scanning, click Repair All button.

Second: A little complicated solution:

• 1. Download a file from:
• http://www.winhelponline.com/fileasso/regfix_vista.zip
• 2. Save it to your DESKTOP. Un-zip (Extract) the contents to your DESKTOP.
• 3. Go to Start, type in

REGEDIT and press Enter-key

• 1. From main menu, select File, then select IMPORT
• 2. Navigate the dialog (click on DESKTOP icon on left to select it)
• 3. Type in regfix_vista.reg in the Filename text-box and click Open button.
• 4. Once the merge is complete, you will see a confirmation message.
• 5. Click OK when done.

Next, get this second registry-fix

• 1. Download and SAVE to your system (to the Desktop or a unique folder) the following registry-fix file
  http://download.bleepingcomputer.com/win-services/vista/msiserver.reg
• 2. Go to Start, type in REGEDIT and press Enter-key
• 3. From main menu, select File, then select IMPORT
• 4. Navigate the dialog (click on DESKTOP icon on left to select it)
• 5. Type in msiserver.reg in the Filename text-box and click Open button.
• 6. Once the merge is complete, you will see a confirmation message.
• 7. Click OK when done.

I think your problem must be resolved after trying this. Thank you!

Bad Image error is a common error message you get when there is some virus or malware on your computer. Some of them are difficult to get rid of. But you can try registry cleaner tool to resolve the problem. Some people get rid of the problem by this method.

registry cleaner is an easy to use software that can fix almost all of your computer problems automatically. You can follow below instructions:

• 1. Download and install registry cleaner by clicking it.
• 2. After installation, click Start Scan button.
• 3. After scanning, click Repair All button.
• 4. Then your problem will be fixed.

If the problem still exists, please try below methods:

Please run sfc to see whether the system files are corrupted, and it will fix disk problem automatically:

Windows 7 /Vista:

• 1. Go to Start / All Programs / Accessories.
• 2. Right click the Command Prompt item and select the ‘Run As Administrator’ option.
• 3. Click Continue on the UAC prompt.
• 4. In the command prompt window, type the following command.
• SFC /SCANNOW
• 5. Press ENTER.
• 6. After this is finished, exit any running programs and reboot the computer.

Windows XP:

• 1. Press Win+R button on your keyboard. Type cmd press enter.
• 2. Type SFC /SCANNOW
• 3. Press ENTER.
• 4. This will take a few minutes to run; try not to use the computer while it is running.
• 5. After this is finished, exit any running programs and reboot the computer.

This problem may occur under following circumstances:

1. 1. Your video card or video driver is outdated or corrupt.
2. 2. You may not have printer permissions assigned.
3. 3. Protected Mode is enabled for the Internet security zone of the web page.
4. 4. Some temporary folders on your user account and the Low folder under the %TEMP% location has been deleted.

To resolve the problem, please follow below instructions:

Soulution one: Update your printer driver to the latest version.

Solution two: Run internet explore as administrator to print the webpage.

1. 1. Close all Internet Explorer windows.
2. 2. Click Start, click All Programs, right-click Internet Explorer and select Run 3 As Administrator.
3. 3. Browse to a website and try test printing a page while running as the Administrator.

Solution three: Try printing after disabling Protected Mode.

1. 1. Click the Tools icon in Internet Explorer.
2. 2. Click the Security tab and uncheck the checkbox beside Enable Protected Mode (requires restarting Internet Explorer).
3. 3. Click Apply , and then click OK.
4. 4. Close all open Internet Explorer windows, and then restart Internet Explorer.
5. 5. Browse to a website and try test printing a page while running as the Administrator.

Solution four: Run a  registry cleaner tool to fix the problem.

 registry cleaner is a tool used by many people. It is easy to use and risk free.

1. 1. Download and install  registry cleaner by clicking it.
2. 2. After installation, boot  registry cleaner, and on the interface click Scan button.
3. 3. After scanning, click Repair All button.
4. 4. Then your problem will be fixed.

Error 0×80040600 often occurs when you use outlook to receive and send emails. You may be able to resolve this issue by using the Inbox Repair Tool to analyze and to repair the .pst file. A .pst file is a personal-folders file that stores your email, contacts, notes, calendar items, and other data.

To solve the problem, please follow below steps:

Step 1: Exit Outlook

Step 2: Find the Outlook .pst file

• Click Start  , type control panel in the Start Search box, and then press Enter.
• If you see Control Panel Home view, click User Accounts and Family Safety.
  If you do not see Control Panel Home view, go to next.
• In the Search Control Panel box in the upper-right corner, type mail, and then press Enter.
• Click Mail or Mail (32-bit).
• Click Data Files.
• Click Personal Folders, and then click Settings.
• Click OK, and then click Close two times.

Step 3: Find the Inbox Repair Tool

• Click Start, and then click Search.
• Click All Files and Folders.
• In the All or part of the file name box, type Scanpst.exe.
• Change the selection in the Look in box to the local hard disk. For example, change the selection to Local Disk (C:).
• Click Search.
• When the search is complete, double-click SCANPST.EXE to start the Inbox Repair Tool.

Step 4: Use the Inbox Repair Tool

• In the Enter the name of the file you want to scan box, type the path and file name of the Outlook .pst file that you found in step 2.
• Click Start.
• After the Inbox Repair Tool operation is complete, click OK.

Step 5: If the problem still exists, please try this registry cleaner tool. It helps a lot of people fix 0×80040600 error. It is easy to use and you just need a few steps.

• Please download and install registry cleaner by clicking it.
• After installation, start registry cleaner.
• On the interface, click start scan.
• After scanning, click Repair All button.

This 0×80070057 error is a common error message caused by a bug in File Backup. If you don’t back up at least one file during the full backup, every backup after that fails. The workaround is to go through the Backup wizard again and choose a new full file backup at the very end.

To solve the 0×80070057 error, please try below methods:

Method 1: Change the decimal symbol setting.

To change the decimal symbol setting, follow these steps:

1. Open Control Panel, click Clock, Language, and Region, and then click Region and Language.
2. Click the Formats tab, and then click Additional settings.
3. In the Decimal symbol field, type . (dot), and then click OK two times.
4. Restart the computer.

Method 2: Add a registry key value

1. Click StartCollapse this imageExpand this im, type Regedit.exe in the Search programs and files box, and then press ENTER.
2. Locate and then click the following registry subkey:

HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\System

1. On the Edit menu, point to New, and then click DWORD Value.
2. Type CopyFileBufferedSynchronousIo, and then press ENTER.
3. Right-click CopyFileBufferedSynchronousIo, and then click Modify.
4. In the Value data box, type 1, and then click OK.
5. Exit Registry Editor.

Method 3:

You can also try this auto fix tool:

http://download.microsoft.com/download/1/8/3/1830F6F8-B99A-4B8C-B493-152230DAFBEF/MicrosoftFixit50719.msi

Method 4:

Please try this registry cleaner tool to fix the problem. It will fix this error automatically.

• Please download and install registry cleaner by clicking it.
• After installation, start registry cleaner and on the interface click Scan button.
• After Scan, click Repair All button