This articel is for those who come across the “0×80073712″ error. And after reading it, I think you will find a good solution.

The error “0×80073712″ may occur when you try to install updates or components in Windows 7 or in Windows Vista by using the Windows Update Website. After this error occurs, you may be unable to install any other software updates.

You can fix this problem by trying to restore corrupted or incorrect system files and settings.

Concerning the problem, there are three methods:

Method 1:

To run the System File Checker

1. Click Start Collapse this imageExpand t, and then type cmd in the Start Search box.
2. In the results area, right-click cmd.exe, and then click Run as administrator. You will be prompted to type the password for an administrator account. Click Continue if you are the administrator or type the administrator password. Then, click Continue.
3. At the command prompt, type Sfc /scannow, and then press ENTER

Note: If information from the installation CD is needed to repair the problem, you may be prompted to insert your Windows Vista or Windows 7 CD. After you run System File Checker, try to run Windows Update. Or, try to turn Windows features off and on to see if the problem is resolved.

Method 2:

To perform a system restore, complete the steps below for your operating system:

For Windows 7 Users

1. Click Start, type system restore in the Searchprograms and files box.
2. Right-click System Restore, click Run as administrator.
3. In the System Restore dialog box, click Next.
4. Select a restore point in the list that’s dated before you you started experiancing the issue and then click Next.
5. On the Confirm your restore point window, click Finish.

For Windows Vista Users

1. Click Start , type system restore in the Start Search box.
2. Right-click System Restore, click Run as administrator, and then click Continue.
3. In the System Restore dialog box, click to select the Recommended restore check box, click Next, and then click Finish.

 Method3:

Use registry cleaner software– the fastest and easiest way to solve the “0×80073712″ error.

Many people recommand this registry cleaner tool to solve this error, because registry cleaner can restore corrupted or incorrect system files and settings in just a few steps. By using it, you can also fix many problems with your computer.

• Improperly installed service packs,
• Viruses or spyware. 
• Certain system files called DLLs become corrupted.

Note: Regarding the above reasons causing the error, resolving it may involve using updating websites, anti-virus software or a software fix.

Instructions to solve the Win32 Error:

One:  Install Updates

1. Install any updates that may be available for your Windows system. To find and install available updates, open the “Start” menu, click “All Programs” and select “Windows Update” from the menu. Click “Yes” to confirm the action if prompted.
2. Select the “Check for updates” option in the left pane of the “Windows Update” window. Click “View available updates” and “Driver updates” for all of the devices that are installed on your computer. Updates will appear in list form.
3. Click each driver update that you want to install on your Windows system and press the “Install” button. If prompted to confirm the action or enter the administrator password, do so and click “OK.” The updates to your device drivers are now installed on your system.

Two:   Eliminate Viruses

Run your antivirus software’s virus scan on your system. This is generally accomplished by opening the program and clicking a “Scan Now” or “Start Scan” button on the main screen. The virus scan finds and eliminates files that are affiliated with viruses that are on your system. If you do not have an antivirus software installed on your system, this is probably part of the issue and you should install one for continuous antivirus protection.

Three:   Use registry cleaner software– the most efficient way to solve the Win32 Error.

• Download and install a registry cleaner . 
• Run the registry cleaner  on your system. Like virus scan software, registry cleaner  are generally started by clicking one button on the main page. 
• It can  find and delete any remaining files that have been left behind in the system’s registry by the antivirus software.

Are you annoyed at the low speed of your PC? If so, you will get a good solution about this problem after reading the following article:

Why are your PC running so slowly?

Main reasons:

1. Hard drive errors.

2. Junk files accumulating on your PC.

3. High level of hard drive fragmentation.

4. Harmful applications (spyware and viruses).

5. Applications consuming computer resources.

Nowadays our PCs always get hard tasks to perform -new colorful games, heavy graphic interfaces, large photos and other files, HD movies. It all takes much of a PC’s hard drive and chipset resources. As a result a computer starts working slowly.

Solution One:

To optimize your PC, there are various Windows utilities you can use. But  one of the easiest way to fix the problem - disk defragmentation.With defragmention, your PC organizes the placement of files and programs on your hard drive so that they occupy a single space. This speeds up reading and writing data on your hard drive.By following a few simple guidelines, you can maintain your computer, help increase your PC speed, and help keep it running smoothly.

Steps:

1. Click “Start” button, go to  “Accessories”，and click the “System Tools”.

2. On the Tools window, click the “Defragment” button. You will now be prompted with another window that shows your hard drives.

3. Select the drive you want to defrag and then click Analyze to make sure that the drive you selected needs defragmentation.

• Discover your junk files and remove them.
• Find and fix the hard drive errors.
• Detect viruses in your PC.

Please try registry cleaner here to speed up your PC!

Microsoft Security Essentials is an antivirus and Anti-malware programme developped by Microsoft to help keep your computer safe from attacks and damages from virus and malware. It is a free programme. It is helpful and effective in some aspects but is also vulnerable sometimes. If you have seen an error as below:

 
Microsoft Security Essentials is not monitoring your computer because a problem occured.
 

It usually means that either the Antivirus and Antispyware engine has crashed and is not scanning the computer, or that another component of Microsoft Security Essentials is not working. 

To solve this issue,

The first thing to check is your computer’s date and time.  Check the clock in the bottom right hand corner of your desktop and make sure the Time/Day/Month/Year are set correctly.  

Next, try a Clean Boot to see if you encounter the same issue.  You can follow the steps here to start Windows in a Clean Boot, just ensure that “Microsoft Security Essentials” is the only thing enabled on the startup tab in MSCONFIG before you reboot: <http://support.microsoft.com/kb/310353>   

If that doesn’t fix the issue, we can manually check the Antimalware service to see if it’s started. 

1. Click Start
2. Click Run button and type Services.msc. 
3. Find Microsoft Antimalware (MsMpSvc) service and make sure it is started.  If it shows as “Stopped” you can right click the service and try to start it.  Make sure you write down any error messages that might appear.  

Lastly, run a registry scan and clean the errors in your computer. Some virus or malwares may corrupt the registry and make the Microsoft Security Essentials stop working. The best way to solve the issue is to download and install a registry cleaner and let is repair your registry. After that, reinstall your security essentials and get it started again.

Very commonly, computer users would encounter popup windows or sudden closure of program with error message saying that particular dll is missing or corrupted. For many people, dll is completely unknown; and when they don’t know what it is, they get very frightened and frustrated. So, what should one do when he gets such errors?

First, we need to know what dll is. “DLL” (Dynamic Link Library” files are basically small storage files which keep a series of important functions for the software of your PC. They are used by all the programs on Windows to open a series of common functions and features, and are used for everything from reading a document to closing your applications. The problem with these files is that it’s so easy for them to become damaged or missing that “missing DLL” errors are highly common and annoying.

The first thing to do is to replace the DLL file in your C:\Windows\System32 folder. To do this,

1. Open up “My Computer” and browse to C:\Windows\System32.

2. Look for the DLL file that’s meant to be missing. If not, goes to step3.

3. If you find it, you should rename it to a different name.

4. After that, you should look for the filename on Google and then download the file from one of the reliable DLL file repositories online.

5. Once downloaded, place the file into the C:\Windows\System32 folder and restart your PC.

If this does not work, you can also try to reinstall the program that is causing the error. This will replace all the files that the program needs, which should place a new version of the DLL file onto your PC. To do this, you must first fully uninstall the program from your system and then perform a fresh install.

There is also an easy way to fix it, which is to use a registry cleaner. Registry cleaner can always fix missing or corrupted DLL errors because of the way they are able to fix the “DLL File References” inside your computer. DLL file references are what Windows uses to find all the DLL files it needs and is basically like a big list of DLL files that your computer can use for any software tool it has.

Welcome to SmartPCFixer Officlal Blog, this blog will keep updated.

Usage and tip to use SmartPCFixer will be post here.